Welcome!

Tidewater Sew-Vac and our factory trained technicians take great pride in servicing your machine.

Below is a checklist all technicians complete, if applicable, with every 24-Point Sewing Machine Tune-up performed.

  1. Check Bobbin Winder Mechanism
  2. Inspect Cam Followers & Spacers
  3. Clean Take-Up Lever
  4. Clean & Lube - Pendulum Swing Mechanism
  5. Check Spool Pins, Felts & Caps
  6. Adjust Needle Bar Height
  7. Check Light Bulb
  8. Acuate All Levers & Knobs
  9. Deburr Needle Plate
  10. Polish Hook
  11. Check Timing (Hook & Feed)
  12. Inspect Feed Dogs & Adjust
  13. Clean Bobbin Case
  14. Adjust Bobbin Case Positioner Bracket
  15. Inspect Gears
  16. Check Linkage Bearings & Sleeves
  17. Test Motor Blocks and Pivot Connections
  18. Adjust Motor Belt & Inspect
  19. Check Timing Belt for Wear
  20. Test Tension Knobs & Springs For Torque
  21. Electrical Cords Inspection
  22. Inspect Foot Control Wear
  23. Clean Exterior & Polish
  24. Test Sew On Demo Fabric